Full Load; Full Week: Week #6

So technically speaking, I don't have a full load... yet. But the only class I haven't taken over yet is the Agriscience class. Instead, I have been doing a few more additional lessons with the Life Skills students. Because of this, I consider that to be a class in which I am teaching so basically a full load!

Past the honeymoon stage?

This week was interesting. Perhaps it's because my students are comfortable with me or perhaps I've been getting a little too relaxed. No serious behavior issues yet, but some of my newer classes I find that the students are a little more... charismatic and a little more social than what I find acceptable. Cell phones have been a bit of an issue. Some students are constantly on their phones. It wasn't an issue before except for maybe one student. Now it's a couple more. It doesn't bother me too much and I have them use their devices to find information so I feel that it is hard to regulate. 

The issue is actually that students might be on their phones but when I ask them a question they can still answer me! Maybe their answer isn't always the deepest answer, but I can't even catch them off guard. My cooperating teachers say they have similar issues too, which isn't entirely a bad thing (at least they are still following along), but I try to emphasize that it is not professional. I did say on the first day that I don't mind the use of phones for educational purposes but if I find that it is becoming an issue, we will have a conversation. So I did establish that expectation. Perhaps not clearly enough. Ms. Kane is going to have to get a little more serious!

One thing I've tried is to kind of make a light-hearted joke out of it. It doesn't always make them put it away but I think it shows that I do notice them on their phones. And the way their desks are setup, there's really not much hiding it anyway. Additionally, there have been a couple of times where conveniently enough, a respectful student asks a question that I don't know the answer to so I turn to whichever student is on their phones (gotchya!) and ask them to look up that information. I'm sure there are better methods to handle this situation, but we'll see how the following week goes.

A conditioned response

Another struggle that I found this week came out of assigning group projects. My cooperating teachers don't normally start with a bellwork or anything, but the students have normally all been very good about getting into the habit of completing bellwork. However, this week in several of my classes, they were working on group presentations. It's as if they completely forgot that bellwork was a thing.. instead they just walk into class and log onto the computer and begin to get to work. I'm happy that they're eager to get working, but it is so hard to reel them in and get them to hop off of the computer to do the bellwork. This has happened in several of my classes, and I think it's because they are used to just walking in and getting to work from before I arrived. Not a bad thing necessarily, but I was still a little taken off guard and had to adjust.

Chapter Degree Recipients

Greenhand Degree Recipients

Reciting the Creed

Chapter Officers

Greenhands and sandwiches

This week was also very full because there were several FFA events taking place. Students made sandwiches for their fundraiser which they were going to use the proceeds for their hunger awareness event. That same day, we had our Greenhand Degree ceremony combined with our Chapter Degree ceremony. I loved being able to help students out prior to the event with editing their speeches. I was also happy to see my students receive their degree. I tried to put myself out there and met some of the parents so that was really nice too. 

Goals and lessons

As I continue with my full load, I hope to continue to keep my head above water. I love teaching and I think that makes any challenge much easier to handle. A personal goal of mine is to be more on top of grades. I wish I didn't have to worry about grades... just engaging students in the learning! 

This week in plant science, we will have students finish their presentations and then we will review for their pest exam and then they will take the exam.

In small engines, we will finish talking about engine classifications and some of the systems.

In agriscience, I begin teaching the entire class and start with public speaking.

In welding, we just finished talking about safety and we are going to get into talking about welding techniques.

In animal bioscience, students are going to present their posters on dairy cattle breeds and get into selective breeding and later into dairy cattle production.

In food science, we are going to talk about pH in foods and do a neat lab with this which will lead us into how pH affects the method of canning, and then we will probably get into cold preservation methods at the end of the week. 

In leadership, we are going to continue talking about public speaking and styles of speeches.

Leaving Thought

"If there is no way, create one" 

All Hands On Deck: Week #5

This week we switched gears a little bit. It was a short week because we had a snow day on Thursday, and on Friday we regrouped with the cohort and University Staff at Penn State. But either way, there was a lot of hands-on action happening which was a little different from what we had been doing.

Making butter!

First... the problem solving approach

One of my areas of improvement was having the students do some more hands-on or student centered learning. In plant science, I was introducing Integrated Pest Management. I actually performed my lab that I did with my cohort members in the fall with a few adjustments per their feedback. You can check out my blog on this lab here.

Students had just learned about the pests and were starting to be introduced to the idea of pest management. I gave them a scenario and they were given the task of solving this scenario. I led them through the steps of IPM without telling them what IPM was or that they were doing it. Once they solved the pest issue and figured out how to best manage the pest, I told them that what they did was essentially IPM. 

I thought the lesson went really smoothly. The only thing that I wish went differently was that I didn't already introduce them to the pest earlier in the Pest ID lessons. Most of them caught on quickly that the pest they needed to find was the Bean Leaf Beetle just by looking back at their notes. I didn't want to trick them but I also didn't want it to be so easy! I still had them find a resource that backed up their claims so they still had to do some research. They did have to do more work later on, though, as they followed the other steps of IPM so it wasn't like they were just sitting around. Point is... I need to make it a little more challenging for them!

Second... Inquiry Based Instruction

Students in my small engines class have pretty much just been in the classroom. While I think they've enjoyed it so far, I think some of them were itching to actually start working on engines. This was my worry as I was planning my unit because of how much content needs to be understood. Yes, they could tear down engines at essentially any point, but either way, there is quite a bit of content to discuss so that they fully understand the functions of an engine. 

Assembling parts of an engine... no tools and no manual!

My cooperating teacher and I decided it would be nice to have them spend a day in the shop. They had just learned about safety, tools, and parts. They had the base knowledge to be able to go in the shop and tinker around with the engines. So I split them into groups and told them to try and assemble the engine based on what you know about the parts and how they function together. They were not going to worry about using tools; just try and see where everything fits.

This was also a great time for me to check on their safety. I thanked them for following safety procedures and remembering those rules. 

I really enjoyed this activity and I think they appreciated something a little different too. It was a great opportunity for them to try and put together the parts just off of prior knowledge. I had to tell some of them to picture themselves as a little three year old putting the round block in the round hole, and the square block in the square hole. If you look close enough, some parts are shaped in such a way that it logically only fits in one place. 

Another thing that was really cool was that I was able to ask them questions about how they knew something went in a certain spot. How do they know the exhaust valve goes in one hole vs. the other? Knowing what the carburetor is, where do you think it goes? 

Third.... hands-on laboratory lessons

Making a battery with pennies and salt water

With my group of Life Skills students, we continued doing fun labs and activities. This week, some of our labs included making butter, making plastic out of corn starch, and running a potato battery and a penny battery. Some worked better than others, but I think either way there was a lesson for them to take away. I think they really enjoyed doing these mini lessons with me and I so enjoyed working with them. Now they are back in the classroom with the rest of their peers, and soon, I'll be taking over that class!

Penny battery circuit lab

One thing that I must say that I really enjoyed was being able to teach them applicable lessons in measuring and mathematics. Some of the labs I did with them needed specific measurements so I would tell them that amount and they would show me how much that was or we would look at it together and see if that was enough. I liked this because I went into it thinking I was only going to be teaching about corn to plastic, for example, but the result is that they walk away with practice of some everyday skills. They may never make anything into plastic from corn starch again, but they will certainly use measurement and mathematics and other problem solving skills in their future. It's an educational win!

Heating up the corn starch mixture

Upcoming plans

In Plant Science, we are going to finish with our discussion about pest management and then I am going to have them work on and present presentations about Pest Management and Control. 

In Small Engines, we are going to finish talking about energy conversion principles and start talking about engine classifications.

In Welding, we are going to finish up our conversation on safety and tie in any more pieces of equipment necessary, and then they will take their safety exam.

I am starting Animal Bioscience on Monday so I will begin the unit on Dairy Cattle Production talking about breeds of cattle and getting into anatomy.

In Food Science, we are going to finish up talking about the history of food preservation and then we are going to get into heat preservation.

I am also planning on starting Leadership next week, so I will begin with having them work on public speaking in preparation for the speaking CDE. The lessons won't be specific to the CDE, but rather how I can prepare them for speaking in life (which will subsequently prepare them for the CDE). 

Next week's about to get a whole lot busier for me... I hope I can manage it all!

Leaving Thoughts

"And I will be to her a wall of fire all around, declares the LORD, and I will be the glory in her midst" --Zechariah 2:5

The Joys and Discomforts: Week #4

What a wonderful week it has been! I still feel like I am in the "honeymoon" stage. Sure there have been some challenges, and sure I've pushed myself in many ways, but I feel empowered. My students are great and my cooperating teachers are inspiring. I am so lucky to be where I am at; I truly believe this. Even though things have been going well, I am learning a lot and continuing to adapt and grow. I feel in all honesty that teaching is where I belong.


Now that I've got that off my chest, I can begin to really talk about the blessings and challenges of my week.

Welding students working on safety posters

Rolling with the punches

I believe I've been doing pretty well with flexibility so far despite my mental need for order and organization. However I find that a lot of my plans are changing. Some of this is due to things out of my control. For example many students are still out due to sicknesses and sports, etc. This has brought several classes down to half their size (no exaggeration!). Also, on Tuesday, there was a two hour delay, so two of my classes were cut out from there. This not only pushed everything back, but in Plant Science, I decided to move around a lesson to today rather than split a two-day lesson over the weekend.

Party Host E-Moment learning about weed pests

The other changes have come from my personal decisions. There were some projects or lessons that I thought were really neat while I was planning it, but looking at it now, 1) we don't have time, 2) I feel like they aren't a good idea anymore, or 3) the students are above or sometimes even below the level at which a certain assignment/activity is set at.

Small engines students demonstrating the function of engine parts

All of these factors combined can make it really challenging to follow a lesson plan let alone a unit plan. I know that it's all part of the experience, however, and adjusting to the needs of my students is of the utmost importance. The detail-oriented side of me is hoping for my plans to follow their original intent so I don't have to change so much!

A fourth classroom

I have two cooperating teachers, and then I work with the shop instructor, Mr. Statler, to teach welding. So I usually jump around 3 different classrooms throughout the week. However, this week, I had the opportunity to teach Life Skills students in their learning support room. These students are normally in my 3rd period Agriscience class, but due to the rigor and nature of the lessons and experiments the students in that class were doing, Mr. Clark thought it would be best to have separate lessons for them.


The topic is on alternative energy and fuel. I joined them in their learning support room and did little lessons with them every day this week. I had an aid with me who was a great help, but I was pretty much on my own as far as facilitating the lesson goes. I was up for the challenge!

Personal Tree Cookies

I had such a great time with these students. I think they really enjoyed me being there and enjoyed the lessons I was doing with them. On Monday, I taught them about chemical bonding. They got to make chemical bonds out of toothpicks and gum drops. Tuesday, we didn't have this class, but Wednesday, we talked about renewable energy and fossil fuels, and we did an activity with recycling and composting vs throwing things in the trash. Thursday, they did something completely different involving reading tree cookies to determine the age of trees, and talking about some by-products of trees. And today, Friday, I showed them a bunch of animal pelts, skulls, and footprints, and had them figure out what the animal was and feel the materials.

Making chemical bonds out of gum drops and toothpicks

There were a lot of things I noticed from observing them and working with them in the Agriscience class, and Mr. Clark shared some input on how he manages them. I also got to meet with the special needs coordinator this week who was able to give me insight on teaching with these students. Even though I did not have the experience or expertise working with students in that situation, I felt very comfortable with teaching them.

I don't always know if they've retained the information the next day, but I am confident that they are learning something, and that they enjoy some of the hands-on activities I am doing with them. They really are quite a joy to work with! I will be working with them for a few more days yet, and then we will be back in the classroom with the rest of the students. I feel like this is exactly the kind of experience I need and want to have so that I can better understand my students in years to come. And I look forward to working with them every day!

"The joys and discomforts of agricultural life..."

Just as the FFA Creed says, I hope to exert an influence on my school and community which will stand solid while I perform my duties during student teaching. I may not always know what the next day will bring, but I know that it brings me great joy to see my students and work with the teachers and staff at Greenwood High School.

Next week in Plant Science, I am excited to start the week with my problem solving approach lesson on Integrated Pest Management. This is the lab I did at Penn State, and now with some refining and a real class, I can try it out for real. I'm nervous but mostly excited, and I think this will change the pace compared to what we have been doing so far. The rest of next week, we will get into pest management and pesticide safety.


In Small Engines, the students are going to take the parts identification quiz, and they are even going to get their hands on a little inquiry as they try to assemble an entire engine based on what they know so far about the parts. They won't necessarily be putting it together using the tools and measurements, rather, they are going to try and see if they can figure out how the parts fit together and really visualize the functions of those parts in one whole engine. They will get started on energy conversion principles as well.


In Agriscience, I will still be with the Life Skills students, and we will be making butter, making plastic from corn, and making a potato battery.


In Welding, students will finish up on their discussion about safety, and get into tools a little bit, and then they will take their safety exam.


I am also picking up Food Science next week, where I will be starting on the Methods of Food Preservation unit.


My goals for next week are to work on planning in time for review of objectives/reflection at the end of the period. I try so hard to keep track of my time and I want to squeeze as much as I can into the class period but before I know it, the bell has rung. I need to work on stopping instruction earlier even if we aren't done yet in order to review.


Another goal, which is perhaps a long term goal, is to create lessons that are more student centered rather than teacher centered. I believe it is my need for organization that prevents me from planning lessons where I don't have direct control over what the students are doing. But I know that it is so important for their learning and beneficial for their problem solving skills so I agree fully that this is a necessary change (and a good change). I hope to overcome this challenge though!

Leaving Thought

"Do small things with great love" -- Mother Theresa

Conducting SAE Visits... Weigh-In Day

On Wednesday, January 25th, I got to experience SAE visits. My home chapter never conducted SAE visits to my knowledge, and my SAEs never really needed visited. Needless to say, the idea of teachers going to students' homes is still a little outside the norm for me, but I really do like the idea of home visits and SAE visits. I see many benefits and will make sure to try and do them with my future students.

Mr. Clark and Mrs. Pontius reviewing rate of gain with Mallory for her steer

We visited with 5 different students on a beautiful Wednesday evening after school hours. Each of these students had steer that they were raising to show at the county fair. They had Beef Finishing-Entrepreneurship SAE programs. My cooperating teachers and I went to do weigh-ins and check the rate of gain to make sure they were on the right track.

 

Mitchell weighing his steer with help from his pap

Mallory, Mitchell's sister, weighing her steer with help from their pap

 

We visited each of the students' farms and got to meet the parents and even grandparents and other farm hands.. oh, not to mention the farm dogs and kitties!

Wyatt holding his steer on the scale

In the fall, Mrs. Pontius and Mr. Clark had sign-ups for weigh ins because they couldn't show unless they had the initial weigh in. They would schedule the visits and collect the weights. They save this information to use for future visits as well. This was how they prepared prior to this day's visit.

This time, Mrs. Pontius and Mr. Clark began with weighing the steer. They would calculate the rate of gain and show the students. They would talk about if that was good or not and whether the student should continue with the feed amounts or increase or decrease them. They also would observe the facilities and barns to make sure that the environment was clean and comfortable for the animals and that they had plenty of water and other needs were met. They would then ask if the student had any questions or concerns about their steer and what more they needed to prepare. They would give advice if needed, however these students were pretty advanced as far as understanding how to raise animals and showing animals.

Brooke with her steer, Donald, and Mrs. Pontius observing the steer

The records used were AET. Students completed all of their work in there. They brought with them a folder with previous weights. They added the new weights and the rate of gain for each students' steer. When it comes closer to the fair, they give out a checklist of what is needed in preparation for the fair. My cooperating teachers then grade the SAEs simply by reviewing the AET records and making sure that they are complete.

 

Ethan's sow with day old piglet litter

Ethan with his pigs

I really benefitted from seeing how visits work, but it makes me nervous for when I have to do my own in the future. I've never shown animals and don't know if I could provide great advice for that. While I have worked on a farm and certainly have some knowledge of farming facilities and practices, I don't know if I could easily identify issues or come up with ways to solve problems. Especially for animals which I have never worked with.



Ethan's steer

One student asked my cooperating teachers before we left if they could look at their gilt and determine if she was pregnant. We all went and looked but none of us could give answers to that question. It's neat to see that collaboration and also good to see that even veteran ag teachers may not know everything. It reminds me that I shouldn't be worried as much about not knowing everything about showing and raising animals. However, I feel it is my duty as the educator to know this information so even if I don't know then, I think it's important to learn for myself as well as guide that student to resources and provide the pathway for learning.

SAEs can be tedious and a lot of work, but I think it's experiences like the potentially pregnant gilt which can generate further learning.

Science Teacher Visit: Biology and Chemistry

I got to visit two different science teachers for this assignment. I visited with Mrs. Novinger's class, a freshman biology course, and Mr. Tomko's class, a chemistry course. Mrs. Novinger was teaching the students about photosynthesis and cellular respiration and Mr. Tomko was performing demonstrations on chemical reactions.

Mrs. Novinger Reflection

 Mrs. Novinger did not post objectives, however she did have posted the essential question which was: How is energy used and transformed in living things?


She also posted two vocabulary words: photosynthesis and cellular respiration. I think she used these similarly to objectives so that students know that today, they will be able to describe those two terms.


I think the students were interested in the lesson. It was mainly a discussion with a worksheet that they worked on in partners. Mrs. Novinger did a great job at facilitating the instruction and asking a lot of questions to get students' gears going. She also drew out some of the explanations on the board to help students visualize the information. She used choral response to help the students pick up on additional vocabulary throughout the lesson. I would say she was helping students facilitate the learning. It was evident that she used a lot of personal experiences and connections throughout the lesson.

Mrs. Novinger hit many of the teaching characteristics. I think more specifically she reached the clarity of instruction and enthusiasm about the subject. She also provided some variability as far as discussing the information, visually presenting the information, and having students fill out a worksheet. There were times where they were listening and there were other times where they were sharing with their partners.

By providing that variability, I think she was able to better focus the students' attention on the lesson. She got their interest by relating things they are familiar with. For example she related aerobics with cellular respiration and use of energy or she related a previous lab experiment to talk about cells. The structure or framework was apparent in providing the concrete application in the form of a worksheet. She clarified goals by simply posting the vocabulary words that stemmed the discussion on the topic.

Mr. Tomko Reflection

I so wish I took pictures the day I visited Mr. Tomko's class. It was a chemistry class of only five students so it was nice to have more of that one-on-one instruction. As I mentioned, he was doing his lesson on chemical reactions and spent the class period creating all of these neat chemical compounds and explaining what was happening in each reaction. He did not post objectives, but as he went through the reactions, he would write the type on the board. It was almost like he was posting the objectives as he performed the lab.

I know I was very interested in the lesson and I believe the students were too. It definitely takes interest approach to a whole new level! Students wore their goggles and got to see, smell, touch, and even taste some of the chemical reactions. I think the use of the senses is what helped make it effective.

I think the Mr. Tomko was facilitating learning as well. He was the one doing all of the experiments, but would have students participate whether it was holding something or pouring something. He would ask questions about what was going on and what they observed rather than just telling them everything that was happening. He allowed them to come to their own conclusions. Mr. Tomko also did well with clarity and business-like behavior. This was important for his class because even though there were five students, they were jokesters and could get distracted easily, so he had to ensure that they were constantly engaged in the lab.

Mr. Tomko focused their attention and capitalize on their interests by simply keeping them physically as well as mentally engaged in the demonstrations. One thing that was really neat that he did was he essentially created alka seltzer. The students smelled it and were curious as to what it made. Mr. Tomko mentioned that the substance was something that people consume. They still couldn't figure it out so he grabbed some cups and remade the alka seltzer in clean beakers and then had the students try it. They had never had alka seltzer so they couldn't quite figure it out, but they not only learned about that chemical reaction, they now know what that tastes like. I just enjoyed the spur of the moment application which I'm sure they won't forget.

The structure he provided wasn't in the form of a worksheet or anything specific like Mrs. Novinger had. Instead, I think the structure came from writing the types of reactions on the board and reviewing them at the end of the class. This review also helped him clarify the goals he had in the class.

Visits were an A+

I really enjoyed seeing other teachers in their element. Each teacher has a different style not only compared to one another, but from my own. I may not teach exactly the same as them, but I hope to keep in mind some of their strategies and apply them in my own classes. It will be especially good to keep these in mind because I could see both topics applying to ag education!

Getting Situated: Week #3

There's a bug going around the school and it's not the kind we're learning about in my Pest Management unit! Everyone is catching the nasty cold and flu this week so we've had to be diligent about hand washing and personal space. Many were out sick, and I definitely caught it too... gah! Despite all of this, I was able to push through the week and make the best out of it. The students are real troopers!

I'm really starting to feel situated in my placement now. While I don't have a full class load yet, I am comfortable with my students. I am starting to find that flow as well, and I think the students can feel more comfortable because they see that I am a little more relaxed as well.

Students in Mrs. Pontius' Food Science class doing an experiment

Time savers

One of my issues is that everything takes much longer than anticipated to complete. I don't mind going at the pace the students need, but I worry sometimes that the application or the "fun stuff" is also getting pushed to a later time. In some cases, they cannot move on until they understand the content, so it's challenging for me make it more interesting. For example, today I wanted students to go through a powerpoint and take some notes about weed characteristics about specific weeds. Following this, I was going to try a party host moment with them where they would pretend to be a weed. They would introduce themselves as the pest and would ask questions about the other. For example they might ask, so do you come here annually, biennially, or perennially? It was supposed to be kind of cheesy but kind of fun!

The issue is that we didn't even get through the whole powerpoint today. We did do something else before hand but if I didn't do that, that would have meant we would have spent the whole class period on just the powerpoint.. a big no no!

One suggestion for me was to have guided notes for them where they could fill in the blanks instead of recording all of the notes. Mrs. Pontius said that even though I told them several times that they didn't have to write everything word for word, there are still some of those high achieving students that will do that. Writing everything down from the powerpoint takes a lot of time. Guided notes would have saved that time while still addressing my concern of making sure they were engaged while I was presenting. 

I need to begin thinking of more ways to save time and work for students so they aren't worrying so much about writing everything down, and rather, just practicing, identifying, and otherwise learning. 

Discipline and management

I really truly enjoy my students, however kids will be kids! I haven't really had too many discipline issues, but this week I did start seeing some really minor things. In plant science, I had given students a little research activity on insect pests and they were to present their insect to the rest of the class. We didn't finish the research portion the first day, so I gave them about 5 minutes the next day to work on it and then present. There was one group that had finished it the day before, but their friend who was absent that day had their packets. So they couldn't present that day. 

Classroom Expectations, Procedures, and Consequences

I should have done a better job walking around and making sure students were prepared, but they also didn't care to address this issue with me before hand nor did they attempt to re-look up any information to help solve the situation. It was a pretty informal presentation, but still certainly not fair to the other students who put in the effort. There wasn't much I could do except wait until the next day for them to present. I realized afterwards that it would have been such a great time to point to my expectations posters behind me and remind them of the preparedness expectation! But I thought about it after the class was over so it was an opportunity missed, unfortunately. Either way, I now know to be more diligent with that and to not pair certain students together if they cannot complete that assignment. 

Wrapping up this week

Overall, I think there was a lot of learning for both myself and the students! Another hurdle I will need to tackle is catching up students who have missed two or three days! That's going to be a challenge, however I'm hoping that I can work through this and get them back on track soon.

In other news, I guest taught in the Spanish class today. I spoke about my experience in Mexico (because I can never talk enough about that!). I even used a little bit of Spanish and had them practice some key vocab words. While it is not teaching in the formal sense, I enjoyed getting in front of students and sharing my knowledge. It was really a confidence booster and now hopefully I've made a connection to those students who are in my other courses. I think it goes to show that teaching doesn't always need to be formal.. they can learn through experiences of others. Learning can happen by simply sharing the wealth and engagin in discussion. 

Going forward

Going forward from here, my goals next week are to work on grades and putting grades in the grade book. In this, I plan to sit down with my cooperating teachers and have them show me how they do it and have a conversation about assessment, etc. 

Another goal is to catch up students who have been behind. Hopefully they will all be healthy and back in class by Monday so we can start from there. 

Next week in plant science I will be finishing up with weed pests and do a hopefully brief lesson about diseases. Then I will assess students with their pest ID quiz. Following this, I will get into pesticide application and usage. 

In small engines, they are just wrapping up on tool identification and they will move on to talking about what small gas engines are and then into parts identification.

In welding, students will be talking about safety and will make a safety poster presentation. My hope is to complete the safety portion next week, but they meet every other day, so I will need to be adamant about connecting concepts from two days before!

Leaving Thought

"Your mind is a garden. Your thoughts are the seeds. You can grow flowers or you can grow weeds" -- Unknown 

Keyword: Flexibility: Week #2

I started this week with probably one of the neatest in-service days I'll ever have. There was a program for those teachers in the district who wanted to be certified to instruct archery. My cooperating teachers and I signed up for this course and spent the majority of the day learning about archery, safety, and shooting techniques.

Not only was it a great experience to get to know other teachers around the school, but it built my confidence in my abilities to perform something I once thought I wasn't good at. Once I learned the technique, I was constantly hitting bulls eyes! I won't get all deep and sappy, but I think that is the perfect metaphorical experience to compare to student teaching. I had been so nervous leading up until Tuesday (when I began teaching) but once I started teaching, I was fine. It felt great teaching and felt completely in my element. Sure there are things I still have to iron out, and I know I still need to develop my flow in the classroom, but I think just like archery, I just need to follow what I've been taught, try my best, and keep practicing until I hit that bulls eye. 


This week was the first week I started picking up Plant Science and Small Gas Engines. On Friday I also began teaching Welding as well. 

Lesson plans

I thought I would be holding onto my lesson plans like a crutch the entire week, but as it turns out, I didn't even touch them during instructional time. There are a few reasons why this happened. One, like I said, I felt good teaching. Normally when I get nervous I forget what I'm supposed to teach and I need to look at my plan. But running through it before the start of class and perhaps growing in my confidence allowed me to remember what I needed to do. 

For another thing, I reached a small crisis the night before when I realized that I needed to move around some of my activities. I realized it didn't make sense for them to learn one thing before they learn the next. I still taught the same things I was planning, just in a different order. So my lesson plans ended up being all out of order anyway. 

I do really like writing my lessons out beforehand because I like to think through what I will be presenting. But I feel that at least for now, I don't need to use them during class. I know there will be a handful of times throughout the semester where I will have to reference them in class simply because I put specific instructions or reminders in my plans. But other than that, I tend to write down my bellwork, interest approach, and the one or two activities we are doing on a sticky note and I'm good to go. 

Time flies...

One of my concerns going into student teaching was being able to accomplish my objectives and thus my activities within the 42 minute time period as I planned out in my lesson plans. This concern is now a reality, though it is certainly not the worst thing to happen. I tend to teach only one objective and get through about one activity. I still need to learn how to gauge how quickly students work which is part of the struggle. But I think we all agree that it is better to over-plan than to not plan enough.
 

I'm sure that there might be small things I can do classroom management-wise to get more done in one class period, but I think that more than anything, I realize how important it is for teachers to really think about what they need to teach vs. what they want to teach. I plan on removing a few lessons that I wanted to teach so my three-week unit wouldn't turn into a six-week unit. The lessons that I wanted to teach certainly relate to the unit, but aren't essential to understanding the core concepts. I considered having them do some of the work for homework, but I would want to spend some class time talking it over, which defeats the idea. Teachers need to be purposeful in what they teach!

Flexibility

Mr. Clark gave me a vocab word for the week which will probably hold firm for the entire semester; Flexibility. As I learn to adjust and I learn what my students need to thrive, I must be flexible. For example, Thursday I took charge of the freshman agriscience course so Mr. Clark and the shop students could work on the baseball dugout project. It wasn't planned, but I was able to take charge of the class and get them to finish what they needed to finish. 

Another example was that Mrs. Pontius was out on Friday. They had a substitute come in her absence. I was teaching plant science and had my powerpoint up and ready to go, but for some reason, the sub and I couldn't figure out how to hook it up to the projector. Instead of having the students sit there and do nothing, I quickly adjusted and had them work on the activity they were originally going to do at the end of the class period. Luckily it worked in my favor because they didn't need the powerpoint to do the activity (though it would have really helped with their understanding), and the activity ended up taking the whole class period (there's that time factor again). Had I presented the powerpoint as planned, they might have had to stop mid activity and pick it up again on Monday. Now I can just present the powerpoint and not worry about finishing the activity. I don't think it will always work like that but being flexible certainly helps get through that!

Looking ahead to next week

I learned a lot just in this first week, and I am eager to continue growing. I didn't talk about welding too much in this blog, but my goal there is to get my students motivated to want to participate. I sense a lack of will-power in my small class that I want to really crank up. Their class is also only every other day so I know it is even more important to build that rapport with my students.

In plant science, I will be teaching them about insect mouth parts. Then we will be identifying specific insects. Next, we will get into identification and classification of weed pests. 

In small gas engines, we will finish up our safety discussion and they will take their exam. Then we will start talking about what small gas engines are, and finish the week with tool identification and a little quiz on that.

In welding, I will only meet with them twice, so on Tuesday, I plan on going over my expectations and procedures. I just did getting-to-know-you activities with them on Friday so I could get them used to me and build that rapport. I will most likely have time to begin introducing arc welding as well. Thursday I will start getting into the safety.

Leaving Thought

"She stood in the storm, and when the wind did not blow her way, she adjusted her sails" -- Elizabeth Edwards